Notes
Acrylic on Shapeoko 4 with an O-flute (single flute) bit gives excellent results. Polished edges.
Tips
Single flute O-flute bit is mandatory for acrylic — it clears chips before they melt back. Keep feeds up to prevent heat buildup.
Details
Acrylic on Shapeoko 4 with an O-flute (single flute) bit gives excellent results. Polished edges.
Bit
| Setting | Value |
|---|---|
| Type | 1/4" single flute O-flute (acrylic bit) mandatory |
| Alternative | 1/8" O-flute for detail work |
Cutting
| Setting | Value |
|---|---|
| Rpm | 18000 RPM |
| Feed Rate | 1500 mm/min |
| Depth Per Pass | 1.5 mm 3mm acrylic |
| Stepover | 40 % |
| Plunge Rate | 300 mm/min |
Notes
| Setting | Value |
|---|---|
| Coolant | Compressed air or mist cooling recommended |
| Tape | Double-sided tape workholding — clamps can crack acrylic important |
Tips
Single flute O-flute bit is mandatory for acrylic — it clears chips before they melt back. Keep feeds up to prevent heat buildup.